This port hasn't been updated for ages and is not used by anybody any
longer, so remove its code to facilitate maintenance.
Also remove references to this port from the documentation and most of
the other places (VMS-specific descrip.vms files still check for it
because it's not clear how to update them all), including configure.
Regenerate the latter and rebake all makefiles.
Finally document that this port is not available any longer.
Fix checks in wxGrid::FreezeTo(): do not silently do nothing if the grid
is too small or all rows/columns are frozen. Do assert if the parameters
are out of range.
See #22766.
It has been a long-time coming, see b95a7c3144 (Allow wxThread::Wait()
and Delete() to block, even under wxMSW., 2011-03-14), but do still
document that it has finally changed.
It's a bit wasteful to also mention these changes in the Git notes, so
don't do it and just leave a reminder to copy the existing change log
entries from 3.2 branch instead when it's time to release 3.3.0.
When closing the document using wxDocManager::CloseDocument(), which is
what happens when using the standard wxID_CLOSE menu command handler,
OnCloseDocument() was called twice: first when wxDocument::Close() was
called directly from CloseDocument() itself and once again later when it
was implicitly called from DeleteAllViews().
This was unexpected and also resulted in calling DeleteContents() twice,
which is even more so for a function supposed to perform cleanup.
Fix this by not calling Close() itself but instead a new CanClose()
function from CloseDocument() to check whether we can close and then
relying on DeleteAllViews() to actually close the document.
To prevent the changelog file from growing too big, start a new one for
the next release.
Also restore the instructions about updating it from Git notes just
before the release.
Add a placeholder for the changes in the next release, restoring the
text removed in d8ec020109 (Copy the changes in 3.1.6 from Git notes to
the change log, 2022-04-04).
The RFC accepts 2-digit years, and it makes most sense to interpret
e.g. 95 as 1995. However, this is an incompatible change, as earlier
95 was literally decoded as 95 AD.
Years 00..29 are considered to mean 20xx; 30..99 means 19xx.
Closes#22196.
This comes at the price of breaking compatibility and returning
"\\share" rather than just "share" from wxFileName::GetVolume() for the
UNC paths. This breakage seems justified because it is required in order
to allow application code to distinguish between paths "x:\foo" and
"\\x\foo", which was previously impossible as GetVolume() returned just
"x" in both cases.
Document this change, adjust the existing checks for the new GetVolume()
semantics and add a new test which passes now, but didn't pass before.
Closes#19255.
This commit is best viewed ignoring whitespace-only changes.
Do this for consistency with the other ports and because this seems more
useful anyhow.
Update the documentation to make this behaviour more clear and document
this change as a (minor) incompatibility in wxMSW.
Also add more unit tests to check for this behaviour. Note this also
fixes the problem with the unit test added in the grandparent commit
under MSW.
Update target architectures to support building with the whole range of
supported Xcode versions by not targeting i386 by default, as well as
adding an arm64 target. Targeting i386 results in a deprecation
error starting with Xcode 10:
error: The i386 architecture is deprecated. You should update your ARCHS
build setting to remove the i386 architecture.
We accidentally ended up with two functions doing the same thing, since
DoGetBorderSize() was added in 743b426605 (Added DoGetClientBestSize()
and use it for a couple of controls in wxMSW., 2009-06-22), as we
already had GetWindowBorderSize() added even earlier in 333d70525c
(added wxWindow::GetWindowBorderSize(), 2006-11-25), so remove the
redundant non-public function and use GetWindowBorderSize() everywhere.
This does change the behaviour of GetWindowBorderSize() in wxMSW, wxGTK
and wxUniv, as it now does what DoGetBorderSize() used to do, but this
should be an improvement, as DoGetBorderSize() implementation was more
precise.
Replace the use of Henry Spencer's regex library with PCRE at the build
level and enable wxUSE_PCRE in wxRegEx code to switch to PCRE-based
implementation there.
Note that this has to be done unconditionally because there is no simple
way to select between the previously used regex library and PCRE at the
makefiles level.
We could still keep the possibility to use the system regex library
under Unix, but this doesn't seem to be worth doing, as we don't support
Unicode REs properly when using it (and never did), so drop support for
this too.
This provides a less intrusive, and also usable by the end users rather
than only by the developers, way of doing the same thing as the just
added wxSizerFlags::DisableConsistencyChecks() does.
The function was documented to not generate the events, but actually
did generate wxEVT_TEXT ones, even if it didn't generate wxEVT_SPINCTRL.
This was inconsistent with wxGTK and generic wxSpinCtrlDouble used under
MSW, so change this to avoid the unwanted events.
Previously, wxSpinCtrl (using native control) and wxSpinCtrlDouble
(using the generic implementation) behaved differently in this case,
with the former changing its value but the latter keeping the last valid
value instead.
Make them behave the same by resetting the value in both cases and
document this behaviour.
Changes of d245dc9e1f (Fix drawing of dotted lines with wxDC in wxMSW,
2020-03-27) improved the appearance of dotted and dashed lines in wxMSW
but at the expense of significant (up to a factor of 300) slowdown.
Allow the applications for which the drawing performance is important to
explicitly request the old behaviour, with uglier, but faster, pens by
choosing to use low quality pens.
Update the graphics benchmark to allow specifying the pen quality and
verify that the performance when using it is the same as before 3.1.4.
See https://github.com/wxWidgets/wxWidgets/pull/2218
See #7097.
Closes#18875.
Notable record the commands that can be used to recover from a conflict
with the server version of the notes (merging notes is more involved and
usually not worth it, they can just be re-added after resetting).
Change wxGetInstallPrefix() to return a string instead of const
wxChar*. The latter was incorrectly obtained from a temporary string if
WXPREFIX was set. While it's possible to fix in a backward compatible
manner without changing the function's signature, it's not worth the
effort for something pretty obscure and used mostly internally.
It has become unnecessary after the previous commit, as now the generic
GetContentScaleFactor() can be used instead of it on all platforms, so
revert the changes of f6cc8ff52c (Add GetOpenGLScaleFactor() to abstract
OpenGL coordinates scaling, 2020-07-10).
See https://github.com/wxWidgets/wxWidgets/pull/1944
See #17391.
This seems more logical and is compatible with wxDC in wxMSW and wxGTK2,
as well as other kinds of DC, e.g. wxPostScriptDC.
It also looks like the current behaviour was unintentional as it
happened only because wxGCDCImpl::DoGetTextExtent() always passed all
non-null parameters to wxGraphicsContext::GetTextExtent(), even if it
didn't need the values for all of them, and thus bypassed the special
case for the empty string which was already present in the latter
function.
Fix this, making DoGetTextExtent() more efficient as a side effect (we
now avoid unnecessary calls to pango_layout_iter_get_baseline() in the
most common case), and also add another test for empty string to
wxGraphicsContext itself, for non-GTK case.
Also document this behaviour and add a test checking for it.
The fix for OpenGL coordinates when using high DPI in b134589cbb (Fix
OpenGL samples when using HiDPI displays, 2019-08-06) did fix it for GTK
3 and macOS, but broke it for MSW and other platforms not using pixel
scaling, as window coordinates are the same as OpenGL ones there, while
GetContentScaleFactor() can still return values > 1 even on these
platforms.
Provide new GetOpenGLScaleFactor() function abstracting this platform
difference and use it in all OpenGL samples to make them work correctly
in high DPI under all platforms.
Closes https://github.com/wxWidgets/wxWidgets/pull/1944Closes#17391.
